The Correct Way To Change Motor Oil
Wednesday, 22 May 2019
Edit
Replacing motorcycle oil once a month or using 1,000 to 1,500 kilometers is strongly recommended to maintain the condition of the motorbike engine. Replacing motorbike oil can be done alone at home, so there is no need to bring a motorcycle to the workshop.
Please note, good oil change is done when the motorcycle is still hot. Because oil is in a runny condition and easily flows out carrying dirt from inside the engine.
Marsudi in his book, 'Self-taught Technician', explained how to change motor oil correctly. Here's the explanation:
1. Leave the motorcycle on the side standard so that the oil can run out.
2. Open the oil-sink screw located at the bottom of the engine when removing the oil filter.
3. Glue the oil out with the container.
4. Open the charging hole measuring bolt.
5. The kick starter valve repeatedly and destroy the use of the compressor in the filling hole so that the remaining oil can be wasted.
6. Clean the oil filter.
7. Clean the oil sieve rotor before filling the engine with oil regularly.
8. Replace the oil filter and oil drain bolt.
9. Fill the tub with the recommended oil and match the type of motor.
10. Install the measuring bolt.
11. Turn on the engine and let it rotate for a few minutes.
12. Turn off the engine and rent a motorcycle in an upright position.
13. Check and make sure the oil level is at the upper limit
Please note, good oil change is done when the motorcycle is still hot. Because oil is in a runny condition and easily flows out carrying dirt from inside the engine.
Marsudi in his book, 'Self-taught Technician', explained how to change motor oil correctly. Here's the explanation:
1. Leave the motorcycle on the side standard so that the oil can run out.
2. Open the oil-sink screw located at the bottom of the engine when removing the oil filter.
3. Glue the oil out with the container.
4. Open the charging hole measuring bolt.
5. The kick starter valve repeatedly and destroy the use of the compressor in the filling hole so that the remaining oil can be wasted.
6. Clean the oil filter.
7. Clean the oil sieve rotor before filling the engine with oil regularly.
8. Replace the oil filter and oil drain bolt.
9. Fill the tub with the recommended oil and match the type of motor.
10. Install the measuring bolt.
11. Turn on the engine and let it rotate for a few minutes.
12. Turn off the engine and rent a motorcycle in an upright position.
13. Check and make sure the oil level is at the upper limit